Holzprofi Sawblades

Type LFZ 1

Type LFZ 1 – mainly for longitudinal sections in natural wood

flat tooth, big rakers provide a fast cut
Diameter	Amount of teeth
250 mm	18
300 mm	14
350 mm	16
400 mm	18

Type WZ2

for longitudinal- and cross sections in natural wood

with alternate diagonal teeth, additionally equipped with rakers, especially for depth cuts in natural wood soft and hard
Diameter	Amount of teeth
216 mm	24
250 mm	24
300 mm	28
315 mm	28
350 mm	32
400 mm	36

Type WZ3

for natural wood, boards, also one-sided with plastics and veneer

with alternate diagonal teeth, for natural wood cross to grain direction and veneered and coated board-material, plaster boards, soft grain insulation boards, linoleum, etc.
Diameter	Amount of teeth
250 mm	40
300 mm	48
315 mm	48
350 mm	54

Type WZ4

for veneers and fine cuts in natural wood

with alternate diagonal teeth, for high demands on cutting quality for noble-wood veneered- or surface tempered board-material. Very fine cuts in natural wood, very big
Diameter	Amount of teeth
216 mm	54
250 mm	60
250 mm	80
300 mm	72
300 mm	96
315 mm	60
350 mm	84
400 mm	96

Type DFZ

with hollow grind for boards coated on both sides

The combination of hollow grind flat teeth and hollow grind roof-flat-teeth provides a cutting (cutting height up to 22 mm) of artificial resin coated boards on both sides without tearing out and without a scoring saw-blade.
Diameter	Amount of teeth
250 mm	48
300 mm	60

Type BK

nail-proof circular saw blades

trapezium tooth, cutting of timber with rest of concrete and nails on it, shuttering panels and gaseous concrete without difficulties.
Diameter	Amount of teeth
300 mm	20
350 mm	24
400 mm	28

band saw blades made of hardened tool-steel